Furniture lock, EFL 3/3C, Dialock, mains-operated lock

Mains-operated electric lock for indoor use: For hinged doors, flaps, sliding doors, drawers or tambour doors in furniture, office and store equipment

Electromotive locking, magnetic interactions cannot take place
locking component without magnet, locking plate crossways
with mini plug and RJ10 plug
3D tolerance compensation
flat design 12 mm,
(installation next to drawer possible with a
distance of >12 mm to cabinet side panel)

Lock case and locking bolt: Zinc alloy

Housing and locking bolt: Nickel plated, Lock case and locking bolt: Nickel plated

The EFL 3 furniture lock is unlocked for 3 seconds after the presentation of an authorised user key in combination with the FT 120, FT 130 furniture terminal (standard latchbolt function). The EFL 3 locks automatically once the time has elapsed.
The optional deadbolt function (permanently unlocked/locked) is set via the FT 120 furniture terminal.
The door status (locked/unlocked) can be determined with the feedback contact and an additional macro. The connected FT 120 furniture terminal then sets an alarm signal.

Keyed alike furniture locks:
Several EFL 3 furniture locks can be switched parallel (keyed alike) in combination with the MLA 6P multi-lock adapter. One V2 connection cable is required in addition for each furniture lock.
Keyed alike/keyed to differ furniture locks:
Several EFL 3 furniture locks can be switched parallel (keyed alike) or individually (keyed to differ) in combination with the MLA 8 multi-lock adapter. One V2 connection cable is required in addition for each furniture lock. ?Using the MLA 8 also allows:
Parallel operation of keyed alike and keyed to differ
Combination with other EFL furniture locks with AMP plug (e.g. EFL 41)
Note
Use marking gauge for installation.
Note max. cable lengths, for more information see MLA 6P and MLA 8 multi-lock adapters.
Connection to old DFT furniture terminals requires special connection cables. Planning by Dialock specialist may be required.
A furniture handle (hole spacing 32 mm) can be screwed to the backside of the fixing plate of the locking component.
Particularly suitable for furniture constructions with soft closing and self closing mechanisms. Not suitable for drawers and hinged doors with push-to-open function.
No additional fascia/material (e.g. slotted sheet metal plate) may be installed between EFL 3 / EFL 3C and locking component.