Electric door opener, Kesseböhmer eTouch

for Dispensa door front fixing pull out larder unit and for Convoy Premio pull out larder unit, grey

The product is not / no more available

    • Technical documents available.
      Please select an article.

    Filter

    Complete your selection

    Help

    Help

    Requested amount is in stock.
    Angefragte Menge ist in Kürze verfügbar, ggf. als Teilmenge sofort verfügbar.
    Item no longer available.

    Note:
    To receive items as fast as possible, choose 'When available' at checkout.

    Electric door opener, Kesseböhmer eTouch

    for Dispensa door front fixing pull out larder unit and for Convoy Premio pull out larder unit

    • Dispensa Door front fixing pull out larder unit

    • Convoy Premio Pull out larder unit

    • Front panel mounting

    • Full extension installation dimensions

    Product details

    Opens by a gentle push onto the cabinet front
    Retrofitting on existing cabinets possible (only with full extension and soft closing mechanism)
    Space-saving and easy installation

    Area of application

    For Dispensa door front fixing pull out larder unit
    and for Convoy Premio pull out larder unit

    Suitable for

    For door front fixing pull out larder unit 300–600 mm, for pull out larder unit 600 mm

    Material

    Drive: Plastic/steel
    Front sensor: Plastic

    Mains voltage

    110 V – 240 V

    Mains frequency

    50 – 60 Hz

    Current consumption

    2 A

    Installation

    Door front fixing pull out larder unit: Next to the bottom guide rail on the right hand side
    pull out larder unit: On hinge side

    Functionality

    (1) Make sure that the extension front is flush against the cabinet front and therefore has slight contact with the front sensor and the drive rod. When installed correctly, the drive rod touches the lower front bracket when the front panel is closed. The device is now in "cabinet closed" mode.
    A brief press of the front panel activates the sensor, and transmits a signal to the drive. The cabinet opens by extending the drive rod.
    If the drive bar is not touching the front bracket, the device is in "cabinet open" mode. The signal of the sensor to the drive results in a short beep, and the bar does not extend.
    (2) Make sure that the front sensor and drive are taught in to each other.
    (3) Perform function tests:
    Function test 1 "cabinet open": open the cabinet. The drive rod retracts into the drive and extends again a little way, and the LED flashes at regular intervals. Press the front sensor. The drive beeps briefly, and the LED flashes faster. The front sensor has transmitted the signal to the drive, but the bar is not extended since the device is open in "cabinet open" mode
    Function test 2 "cabinet closed": simulate a closed cabinet by pressing the spring rocker of the drive rod. The drive rod retracts into the drive and extends again a little way. Use your thumb as resistance so that the bar touches it when it extends. Press the front sensor. The drive emits a brief beep, and the bar is extended.

    Order reference

    The pull out larder unit must be ordered separately.

    Supplied with

    1 electric drive
    1 front sensor
    1 mounting aid
    1 mains lead 1.5 m with flat Euro plug
    1 set of fixing material
    Installation instructions
    Operating instructions

    Complementary products and accessories
    Corporate Office: Häfele Malaysia,
    Phone: +603 5569 2526, E-Mail: info@hafele.com.my
    04/10/2022